1、三菱 FX1N 三菱-FX1N-2AD-BD 用戶 手冊
This manual has been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows:
a) Any engineer using the product associated with this ma
2、三菱 FX1N 三菱-FX1N-2EYT-BD 用戶 手冊
1N-2EYT-BD output expansion board (hereafter referred to as "FX1N-2EYT-BD" or "Function
expansion board") is a function expansion board to be installed in the FX1S or FX1N series programmable
c
3、三菱 FX1N 三菱-FX1N-2EYT-BD 用戶 手冊
1N-2EYT-BD output expansion board (hereafter referred to as "FX1N-2EYT-BD" or "Function
expansion board") is a function expansion board to be installed in the FX1S or FX1N series programmable
c
4、三菱 FX1N 三菱-FX1N-4EX-BD 用戶 手冊 Caution
1) Do not use the function expansion board in environments that contain excessive or
conductive dust, corrosive or flammable gas, moisture or rain, excessive heat, regular
impact shocks or
5、三菱 FX1N 三菱-FX1N-5DM 用戶 手冊
The power is supplied from the PLC main unit.
5V DC, 110 mA
4. Outline of Performance
This section describes the function list of the 5DM.
The operator functions available with the operatio
6、三菱 FX1N 三菱-FX1N-8AV-BD 手冊
he analog trimmer FX1N-8AV-BD is a function
xpansion board which is mounted to the FX1S/
X1N Series PLC basic unit and used as an analog
mer trimmer of rotary switch.
or the specifications
7、三菱 FX1N 三菱-FX1N 硬件 手冊
FX1N SERIES PROGRAMMING CAUTION
Thank you for buying The Mitsubishi FX1N series controller.
Please note the following.
Notes: Block Move instruction
Applicable PLC: FX1N Ver 1.00-2.10
Applic
8、三菱 FX1N 三菱-FX1N 硬件 手冊
FX1N SERIES PROGRAMMING CAUTION
Thank you for buying The Mitsubishi FX1N series controller.
Please note the following.
Notes: Block Move instruction
Applicable PLC: FX1N Ver 1.00-2.10
Applic
9、三菱 FX1N 三菱-FX1N-BAT 用戶 手冊
• The module case is made of resin; do not drop it or subject it to strong
shock.
Doing so may damage the module.
• When disposing of this product, treat it as industrial waste.
10、三菱 FX1N 三菱-FX1N-BAT 用戶 手冊
• The module case is made of resin; do not drop it or subject it to strong
shock.
Doing so may damage the module.
• When disposing of this product, treat it as industrial waste.
11、三菱 FX1N 三菱-FX1N-CNV-BD 手冊
Make sure to turn off the power before installing the FX1N
CNV-BD.
A)Connection board FX1N-CNV-BD
(function expansion board)
B)Connector for optional e
12、三菱 FX1N 三菱-FX1N-EEPROM-8L 手冊
1) Turn off the write-protect switch provided on the right side of the 8L.
2) Attach the 8L to the PLC while the PLC power is off.
3) Turn on the power of the PLC. Press the RD key of the 8L