三菱 FX2NC 三菱-FX2NC (DSSDS) 硬件 手冊
資料介紹：
This manual provides information for the installation and use of the FX2NC. The manual has
been written to be used by trained and competent personnel. The definition of such a person
or persons is as follows:
a) Any engineer who is responsible for the planning, design and construction of automatic
equipment using the product associated with this manual, should be of a competent
nature, trained and qualified to the local and national standards required to fulfill that
role. These engineers should be fully aware of all aspects of safety with regards to
automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and
qualified to the local and national standards required to fulfill that job. These engineers
should also be trained in the use and maintenance of the completed product. This
includes being completely familiar with all associated documentation for said product. All
maintenance should be carried out in accordance with established safety practices.
c) All operators of the completed equipment (see Note) should be trained to use this
product in a safe manner in compliance to established safety practices. The operators
should also be familiar with documentation which is associated with the actual operation
of the completed equipment.
Note : The term ‘completed equipment’ refers to a third party constructed device which
contains or uses the product associated with this manual.
PLC FX2NC-16MR-T-DS
可編程控制器 FX2NC系列
PLC FX2NC-16MT-D/UL
PLC FX2NC-32MT-DSS
PLC FX2NC-64MT-DSS
PLC FX2NC-16MT-DSS
PLC FX2NC-96MT-D/UL
轉換適配器 FX2NC-CNV-IF
PLC FX2NC-96MT-DSS
RS-485適配器 FX2NC-485ADP
RS-232C適配器 FX2NC-232ADP
PLC FX2NC-64MT-D/UL
RS-232C適配器 FX2NC-232ADP
PLC FX2NC-32MT-D/UL
RS-485適配器 FX2NC-485ADP
上一條：
下一條：相關下載
