資料介紹:
In this Installation Guide, instructions at a lower level than the above, instructions for other functions, and so on
are classified into "POINT".
After reading this Installation Guide, always keep it accessible to the operator.
CAUTION
Before executing the test mode, always read Section 2.3 "Precaution for test
mode".
Windows is a trademark of Microsoft Corporation.
The "Mitsubishi general-purpose AC servo MELSERVO Servo Configuration Software" is a production of
Mitsubishi Electric Corporation. Mitsubishi Electric Corporation reserves the copyright and all other rights of
this software.
This Installation Guide may not be reproduced or copied, in whole or part, without written consent of
Mitsubishi Electric Corporation.
All other company and product names contained in this Installation Guide are registered trademarks or
trademarks of their respective companies.
伺服放大器 MR-J3-700A
伺服放大器 MR-J2S-11KA
伺服放大器 MR-J3-20B
電機電源用接頭套件 MR-PWCNS5
電磁制動器用電纜 MR-BKS1CBL2M-A2-H
伺服放大器 MR-J3-500A
伺服驅動器 MR-J2S-30KB4
PLC FX2N-48MR-ES/UL
PLC FX3G-40MR/ES-A
編碼器電纜 MR-ENCBL50M-H
PLC FX2N-64MR-D
PLC FX2N-64MR-UA1/UL
編碼器電纜 MR-JHSCBL5M-L
伺服驅動器 MR-J2S-350A4
SSCNET Ⅲ 光纖 MR-J3BUS50M-B
伺服驅動器 MR-J2S-40B
PLC FX2N-80MR-ES/UL
伺服放大器 MR-J3-60B
伺服電機電源用電纜 MR-PWS2CBL03M-A2-L
PLC FX2N-128MR-D
編碼器電纜 MR-JHSCBL20M-L
伺服放大器 MR-J3-200A
PLC FX1S-10MR-001
編碼器電纜 MR-JCCBL20M-L
伺服放大器 MR-J3-10A
伺服放大器 MR-J3-350A
編碼器用電纜 MR-EKCBL10M-H
伺服控制器 MR-J2S-22KA
PLC FX3U-48MR/ES-A
伺服放大器 MR-J3-200B