精品国产一区二区-精品国产一区二区三区19-精品国产一区二区三区www-精品国产一区二区三区不卡-精品国产一区二区三区不卡在线

[Setup and Maintenance Precautions]
!
CAUTION
• Please read this manual thoroughly and confirm the safety before starting online operations
(especially, program modifications, forced outputs, and operating status modifications), which
are performed by connecting the GX Developer via the MELSECNET/H network system to a
running CPU module of other station. Performing incorrect online operations may damage the
machinery or result in accidents.
• Never disassemble or modify the module. This may cause breakdowns, malfunctions, injuries or
fire.
• Use any radio communication device such as a cellular phone or a PHS phone more than 25cm
(9.85 inch) away in all directions of the programmable controller.
Not doing so can cause a malfunction.
• Completely turn off the externally supplied power used in the system before mounting or
removing the module. Failure to do so may damage the module or result in malfunctions.
• Do not touch the terminals while the power is on. Doing so may cause malfunctions.
• Switch off all phases of the externally supplied power used in the system when cleaning the
module or retightening the terminal or module mounting screws. Failure to completely shut off all
phases of the external power supply may cause module breakdowns and malfunctions. If the
screws are loose, it may cause the module to short-circuit, malfunction or fall off. If the screws
are tightened excessively, it may damage the screws and cause the module to short circuit,
malfunction or fall off.
• Do not install/remove the module to/from the base unit more than 50 times after the first use of
the product. (IEC 61131-2 compliant)
Failure to do so may cause malfunction.
• Before handling the module, always touch grounded metal, etc. to discharge static electricity
from the human body.
Not doing so may cause a failure or malfunction of the module.

GI-62.5/125光纜型模塊 QJ71LP21GE
以太網模塊 A1SJ71QE71N-B2
薄型電源模塊 Q61SP
老款小A系列主基板 QA1S38B
Q系列PLC存儲卡 Q3MEM-8MBS-SET
串行通信模塊 QJ71C24-R2
CPU單元 Q2ACPU-S1
熱電偶型溫度調節模塊(升級版) Q64TCTTBWN
對應SSCNET定位模塊 QD75M2
電源模塊 Q61P
輸入和輸出的模塊 QH42P
串行通訊模塊 QJ71C24N-R2
DC型速輸入模塊 QX70H
基本型QCPU Q01CPU
適配器 Q6DIN3
更換用大容量電池模塊 Q8BAT-SET
DC型輸入模塊 QX81-S2
Q系列PLC內存卡 Q3MEM-4MBS
薄型電源模塊 Q61SP
薄型主基板 Q32SB，Q33SB，Q35SB
冗余CPU Q25PRHCPU
Profibus模塊 QJ71PB92D，QJ71PB93D
C語言的控制單元 Q06CCPU-V
電源冗余系統用電源模塊 Q64RP
冗余CPU Q12PRHCPU
GI-50/125光纜型模塊 QJ72LP25G
輸出模塊 QY10，QY18A，QY22
速型電壓/電流輸入模擬量模塊 Q64ADH
總線連接單元 GT15-QBUS2
調制解調器接口模塊 QJ71CMO