三菱 三菱-教學 手冊 on Q7BAT-SET Battery
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
This instruction manual is made of recycled paper.
(1/1) BCN-P5541-D
the battery in the battery holder.
The PLC power needs to be ON for 10 minutes or longer prior to
battery removal.
Wiring duct
Make sure to complete the battery replacement within 3 minutes. Failure to do so may delete the data in memory,
although it includes a condenser to back up the memory for a while without battery.
When the MELSEC-Q series is used as a UL-certificated product, the Q7BAT battery replacement must be done by
service personnel. The service personnel are defined as experienced technicians who have been sufficiently
educated and trained, and are capable of perceiving and avoiding operational hazard.
5. Disposal of batteries
When disposing of batteries, separate them from other wastes according to the local regulations. (For details of the
battery directive in EU member states, refer to the user’s manual for the CPU module used.)
6. Transportation precautions
As they include lithium, the Q7BAT-SET and Q7BAT must be treated as Class 9 dangerous goods during
transportation. Prior to shipment, Mitsubishi packs products properly in order to ensure safety. However, when
transporting the products, which are unpacked once or repacked after purchase, make sure to observe the
dangerous goods regulations of the country as well as IATA Dangerous Goods Regulations and IMDG code. Also,
consult and determine the details with the transportation company.
連接器 A6CON1E
連接器 A6CON2
連接器 A6CON1
連接器 A6CON4
連接器 A6CON3E
連接器 A6CON2E
網絡模塊 A6RCON-R75
連接器 A6CON2
連接器 A6CON3E
連接器 A6CON1E
連接器 A6CON1
連接器 A6CON4
調制解調器接口模塊 QJ71CMON
連接器 A6CON3
網絡模塊 A6RCON-R75
連接器 A6CON3
連接器 A6CON2E
上一條：
下一條：相關下載
