三菱 FX3G 三菱-FX3G-5DM 用戶 安裝 手冊
資料介紹：
This manual confers no industria
nor does it confer any patent lice
held responsible for any problem
occur as a result of using the co
Warranty
Mitsubishi will not be held liable f
the cause of Mitsubishi; opportun
Mitsubishi products; damage, se
caused by special factors unpred
other than Mitsubishi products; a
This product has been manufa
industries, and has not been d
a device or system used in pu
Before using the product for s
power, aerospace, medicine o
Mitsubishi Electric.
This product has been manufa
when installing the product wh
product fails, install appropriat
•
•
•
HEAD OFFICE
HIMEJI WORKS
: TOKYO BUILDI
JAPAN
: 840, CHIYODA
ler
C
g,
The following section describes the installation method for the FX3G Series PLC
(FX3G-40M…. In this example).
Turn off the power to the PLC before installation.
For more details on installation and removal, refer to the PLC main unit manual.
→ Refer to the FX3G Series User's Manual - Hardware Edition
PRECAUTIONS
• Make sure to cut off all phases of the power supply externally before attempting
installation or wiring work.
Failure to do so may cause electric shock or damage to the product.
INSTALLATION
PRECAUTIONS
• Use the product within the generic environment specifications described in PLC
main unit manual (Hardware Edition).
Never use the product in areas with excessive dust, oily smoke, conductive dusts,
corrosive gas (salt air, Cl2, H2S, SO2, or NO2), flammable gas, vibration or
impacts, or expose it high temperature, condensation, or rain and wind.
If the product is used in such conditions, electric shock, fire, malfunctions,
deterioration or damage may occur.
• Do not touch the conductive parts of the product directly.
Doing so may cause device failures or malfunctions.
• Connect the display module securely to their designated connectors.
Loose connections may cause malfunctions.
3. Specifications
3.1 Applicable PLC
• Only one display module can be used per main unit.
For details on the system configuration, refer to the following manual.
→ Refer to the FX3G Series User's Manual - Hardware Edition
3.2 General Specifications
The general specifications are equivalent to the PLC main unit.
For general specifications, refer to the following manuals.
→ Refer to the FX3G Series User's Manual - Hardware Edition
STARTUP AND
MAINTENANCE
PRECAUTIONS
• Do not disassemble or modify the PLC.
Doing so may cause fire, equipment failures, or malfunctions.
* For repair, contact your local Mitsubishi Electric distributor.
• Do not drop the product or exert strong impact to it.
Doing so may cause damage.
DISPOSAL
PRECAUTIONS
• Please contact a certified electronic waste disposal company for the
environmentally safe recycling and disposal of your device.
TRANSPORT AND
STORAGE PRECAUTIONS
• The product is a precision instrument. During transportation, avoid any impacts.
Failure to do so may cause failures in the product. After transportation, verify
the operations of the product.
Model name Applicability
FX3G Series PLC Ver.1.10 or later
PLC FX3G-14MT/ESS
PLC FX3G-40MT/ES-A
PLC FX3G-24MT/ES-A
RS-232C擴展板 FX3G-232-BD
PLC FX3G-60MT/ESS
PLC FX3G-24MR/ES-A
擴展板 FX3G-CNV-ADP
PLC FX3G-40MR/ES-A
PLC FX3G-60MT/ES-A
模擬量輸出擴展板 FX3G-1DA-BD
模擬量輸入擴展板 FX3G-2AD-BD
PLC FX3G-60MR/ES-A
PLC FX3G-14MT/ES-A
RS-485擴展板 FX3G-485-BD
PLC FX3G-14MR/ES-A
PLC FX3G-40MT/ESS
擴展板 FX3G-8AV-BD
PLC FX3G-24MT/ESS
RS-422擴展板 FX3G-422-BD
上一條：
下一條：相關下載
