三菱 FX3U 三菱-FX3U SERIES 硬件 手冊
資料介紹：
WIRING
PRECAUTIONS
• Connect the AC power supply to the dedicated terminals
specified in this manual.
If an AC power supply is connected to a DC input/output
terminal or DC power supply terminal, the PLC will burn out.
• Do not wire vacant terminals externally.
Doing so may damage the product.
• Use class D grounding (grounding resistance of 100Ω or less)
with a wire of 2mm2 or thicker on the grounding terminal of the
FX3U Series main unit.
However, do not connect the ground terminal at the same point
as a heavy electrical system.
• When drilling screw holes or wiring, make sure cutting or wire
debris does not enter the ventilation slits.
Failure to do so may cause fire, equipment failures or
malfunctions.
PLC FX3U-48MT/ES-A
PLC FX3U-80MT/ESS
存儲器盒 FX3U-FLROM-64L
RS-232C適配器 FX3U-232ADP
PLC FX3U-80MT/ES-A
PLC FX3U-16MT/ES-A
模擬量輸入用適配器 FX3U-4AD-ADP
PLC FX3U-32MT/DSS
RS-422通信板 FX3U-422-BD
PLC FX3U-64MR/DS
RS-485通信板 FX3U-485-BD
PLC FX3U-16MR/DS
PLC FX3U-32MT/ESS
通信板 FX3U-CNV-BD
PLC FX3U-80MR/DS
RS-485通信用 FX3U-485ADP-MB
PLC FX3U-48MT/ESS
速輸出用適配器 FX3U-2HSY-ADP
PLC FX3U-16MT/DS
可編程控制器 FX3U系列
PLC FX3U-64MT/ESS
PLC FX3U-32MR/ES-A
PLC FX3U-32MT/DS
PLC FX3U-80MT/DS
RS-232通信用 FX3U-232ADP-MB
PLC FX3U-48MT/DSS
PLC FX3U-64MR/ES-A
PLC FX3U-80MR/ES-A
可編程控制器 FX3UC系列
RS-485適配器 FX3U-485ADP
上一條：
下一條：相關下載
