三菱 手冊 三菱-手冊_IB80030I
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
N PRECAUTIONS]
DANGER
z Some failures of the GOT main uni t, communication module, communication
board or cable may keep the outputs on or off.
An external monitoring circuit should be provided to check for output signals
which may lead to a serious accident.
Not doing so can cause an accident due to false output or malfunction.
z If a communication fault (including cable disconnection) occurs during
monitoring on the GOT, communication between the GOT and PLC CPU is
suspended and the GOT bec omes inoperative.
For bus connection: The CPU becomes faulty and the GOT inoperative.
For other than bus connection: The GOT becomes inoperative.
A system where the GOT is used should be configured to perform any
significant operation to the system by using the switches of a device other
than the GOT on the assumption that a GOT communication fault will
occur.
Not doing so can cause an accident due to false output or
模塊 A1SD35ID1
轉換電纜 FX2N-CNV-IF
中繼模塊 AJ65BT-RPI-10A
電流輸入模擬量模塊 Q68ADI
模塊 AJ71ID1-R4
模塊 A1SD32ID1
外部輸入/輸出單元 GT15-DIO
模塊 AJ35PTC-CNV-GI
中斷模塊 AI61-S1
模塊 AD32ID2
模擬量輸入模塊 Q68ADV，Q68ADI
模塊 AD32ID1
模塊 AJ35PTC-CNV-SI
電流輸出模擬量模塊 Q68DAIN
模塊 AJ35PP-CNV-GI
模擬量輸出模塊 A68DAI-S1
適配器 Q6DIN1
中繼模塊 AJ65BT-RPI-10B
模擬量模塊 AJ65BT-64DAI
中斷模塊 QI60
模塊 AJ35PTC-CNV-SI
轉換適配器 FX2NC-CNV-IF
適配器 Q6DIN2
速中斷模塊 A1SI61
CCLink模塊 AJ65BT-64DAI
模塊 A1SD32ID2
模塊 AJ35PP-CNV-GI
模擬量輸出模塊 A1S68DAI
模擬量模塊 AJ65VBTCU-68ADIN
模塊 AD35ID2
上一條：
下一條：相關下載
