三菱 手冊 三菱-手冊_IB(NA)-0800320
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
esign precautions]
DANGER
Configure a safety circuit outside the PL C, so that the entire system operates
safety even if there is an external power error or if the PLC is malfunctioning.
(1) The output status to the outside varies, depending on the output status
setting in the external-output control setting mode: Please be careful
when performing the setting. Refer to the Section 3.3.9 of detailed manual
for details on the output status.
(2) Due to malfunction of the output el ement or its internal circuit, normal
output may not be obtained or erroneous output may be performed.
For output signals that may cause a severe accident, set an external
circuit to monitor the output.
模擬量輸出模塊 A68DAI-S1
電流輸出模擬量模塊 Q68DAIN
ID接口模塊 QD35ID1
中繼模塊 AJ65BT-RPI-10A
轉換電纜 FX2N-CNV-IF
中斷模塊 AI61-S1
模塊 AJ35PP-CNV-GI
中繼模塊 AJ65BT-RPI-10B
模塊 AJ35PP-CNV-SI
模塊 AD32ID1
模塊 AD35ID2
模塊 AJ35PP-CNV-GI
中斷模塊 QI60
模塊 A1SD32ID1
模擬量模塊 AJ65VBTCU-68ADIN
模擬量輸出模塊 A616DAI
外部輸入/輸出單元 GT15-DIOR
適配器 Q6DIN3
模擬量輸出模塊 Q68DAV，Q68DAI
適配器 Q6DIN1A
模塊 A1SD35ID1
適配器 Q6DIN1
模塊 AD35ID1
模塊 AJ71ID2-R4
CCLink模塊 AJ65BT-64DAI
模塊 A1SJ71ID2-R4
中斷輸入模塊 QI60
外部輸入/輸出單元 GT15-DIO
速中斷模塊 A1SI61
AS-I主站模塊 FX2N-32ASI-M
上一條：
下一條：相關下載
