資料介紹:
3. Items related to prevention of bodily injury or property damage
When transporting or installing a built-in IPM spindle or linear servomotor, be careful so that your hand or
property will not be trapped in the motors or other metal objects. Also keep the devices with low magnetic
tolerance away from the product.
Do not apply voltages to the connectors or terminals other than voltages indicated in the connection
manual for the controller or specifications manual for the drive unit. Failure to observe this could cause
bursting, damage, etc.
Incorrect connections could cause the devices to rupture or damage, etc. Always connect the cables to the
indicated connectors or terminals.
Incorrect polarity (+ -) could cause the devices to rupture or damage, etc.
Persons wearing medical devices, such as pacemakers, must stay away from this unit. The
electromagnetic waves could adversely affect the medical devices.
Fins on the rear of the unit, regenerative resistor and motor, etc., will be hot during operation and for a while
after the power has been turned OFF. Do not touch or place the parts and cables, etc. close to these
sections. Failure to observe this could result in burns.
Do not enter the machine’s movable range during automatic operation. Keep your hands, feet or face away
from the spindle during rotation.
DANGER
CAUTION
PLC FX2N-64MT-001
伺服電機 HC-MFS13
PLC FX1N-40MR-ES/UL
伺服放大器 MR-J2S-350B4
PLC FX2N-64MT-D
附件 MR-J2HBUS5M
編碼器電纜 MR-JHSCBL20M-H
編碼器電纜 MR-JCCBL10M-H
串行多點連接單元 GT01-RS4-M
伺服電機 HC-MFS23K
Q系列PLC線性快閃存儲卡 Q2MEM-2MBF
PLC FX3U-80MR/ES-A
PLC FX2NC-16MT-DSS
編碼器電纜 MR-JCCBL20M-H
SSCNET Ⅲ 光纖 MR-J3BUS40M-B
Q系列PLC內存卡 Q2MEM-2MBS
PLC FX2N-64MT-DSS
電磁制動器用電纜 MR-BKS1CBL10M-A2-H
視頻輸入單元 GT16M-V4
Q系列PLC線性快閃存儲卡 Q2MEM-4MBF
伺服放大器 MR-J2S-100B4
多路轉換模塊 A60MX
伺服驅動器 MR-J2S-40B
Q系列PLC存儲卡 Q3MEM-4MBS-SET
編碼器電纜 MR-ENCBL2M-H
編碼器接頭 MR-J3ENSCBL2M-L
伺服放大器 MR-J3-500B
編碼器接頭 MR-J3ENCBL5M-A2-H
伺服電機電源用電纜 MR-PWS1CBL5M-A2-L
PLC FX3G-60MR/ES-A